Key specifications
- Measuring Principle
- Kalorimetrik
- Sensitivity
- ±2.. ±8 cm/sec
- Ambient Temperature
- -10 ... +80°C
- Pressure (Pmax)
- 63 bar
Selected size:
Product Description
The operating status is shown by 10 LEDs on the product. When the flow velocity drops below the set limit, the output state will change. The limit for breaking the contact can be selected at the indicated step. In the measuring cycle, the recommended measuring range is 4÷150 cm/s, and the cycle takes from 4 to 8 s (the measuring range for the default setting is 4÷400 cm/s). Two standard lengths of rod-type sensor are offered according to the pipe inner diameter at the installation site; a rod-type sensor of 65 mm or 125 mm length can be selected. If the flow velocity in the medium is to be monitored in a pipe smaller than DN25 (or if the flow velocity is below the sensor range for the given pipe diameter), it is advantageous to use an adapter block suited to the relevant flow velocity. This way it works properly while keeping the installation conditions. The adapters are designed for the short version of the 65 mm sensor, using a direct neck with a G½" pipe thread.
Technical Specifications
| Measuring Principle | Kalorimetrik |
|---|---|
| Sensitivity | ±2.. ±8 cm/sec |
| Ambient Temperature | -10 ... +80°C |
| Pressure (Pmax) | 63 bar |
| Protection Class | IP67 |
| Supply | 24 V ± 10 % |
🔗 Share this product
Send the product page to your team or purchasing contact.
Other products in this group
VAS-10 Economy Series Flow SwitchIt detects liquid flow in the pipeline through a mechanical tongue and opens or closes the circuit when flow drops belowView details 
VAS-10 Plastic Paddle Flow SwitchIt detects liquid flow in the pipeline through a mechanical tongue and opens or closes the circuit when flow drops belowView details 
VAS-20 Paddle Type Flow SwitchTongue-type flow switches detect liquid flow in the pipeline through a mechanical tongue and open or close the circuit wView details 
VAS-30 Brass Body Flow SwitchWhen flow stops or drops below a certain level, it makes the system stop safely or raise an alarm. With its easy installView details 
VAS-35 Plastic Body Flow SwitchPlastic flow switches can be used safely in systems with aggressive liquids thanks to their high chemical resistance. ThView details 
VAS-FS10 Thermal Flow SwitchIt is a calorimetric flow switch and is therefore designed for monitoring thermally conductive liquids. The biggest advaView details ← Back to group: Flow Switches